Glass KnobClear / Small

Details

With an early 20th century design, this glass knob adds historic style to cabinetry and furniture. This glass knob is durable, however, it is glass and requires special care when installing. To tighten, turn only the nut on the back end of the screw. Do not turn the knob itself. Tighten with care and do not over-tighten.

Please Note: Due to the imperfect nature of this product, dimensions can and do vary slightly. The listed diameter and projection are approximate measurements and are not exact.

Small Dimensions:

• 1″ Diameter (approx.)
• 1″ Projection (approx.)
• Includes a 2-1/2″ long smooth-headed nickel-plated bolt and nut.
• Can be used on doors and drawers up to 1-3/8″ thick.

Medium Dimensions:

• 1-1/4″ Diameter (approx.)
• 1-1/4″ Projection (approx.)
• Includes a 2-1/2″ long smooth-headed nickel-plated bolt and nut.
• Can be used on doors and drawers up to 1-1/4″ thick.

Large Dimensions:

• 1-1/2″ Diameter (approx.)
• 1-1/2″ Projection (approx.)
• Includes a 3″ long smooth-headed nickel-plated bolt and nut.
• Can be used on doors and drawers up to 1-3/8″ thick.

If your drawer face or cabinet door are thinner than the listed maximum thicknesses, then the bolt will protrude into your cabinet by the difference. Though not required, you can cut the bolt down with a hacksaw if the extra length is not desired. If doing this, please take special care to make sure that you do not cut the bolt too short. You will need at the very least 1/8″ of length to attach the bolt, but 1/4″ extra length is recommended.

C10802