Exterior LED Bulb Kit [Eurovan]w/Turn Signal Relay

Details

While researching this kit, our objectives were clear: improve the underwhelming tail light performance without compromising the tail/brake light contrast, achieve optimal front marker light brightness, significantly enhance brake light responsiveness, and meaningfully upgrade reverse light visibility. We’re pleased to report that this kit successfully meetsand even exceedsthese goals.

Kit includes:
(2) LED front turn signal bulbs
(2) LED rear turn signal bulbs
(2) LED tail/brake light bulbs
(2) LED reverse light bulbs
(2) LED license plate light bulbs
(3) LED 3rd brake light bulbs
(4) Resistors (for late model Eurovan only)*
Installation instructions

For early vans: New turn signal relay for early vans (necessary for LEDs to function properly)
For late vans: Four (4) load resistors and installation hardware for later vans (necessary for LEDs to function properly)*

*We have found that most of the time, our Exterior LED Bulb Kit functions as designed. However, some vans exhibit funky turn signal behavior, but fear not We have a fix! We include a Resistor Fix Kitand a new turn signal relay to remedy the issue a small percentage of folks might experience.

See the fitment note to determine which kit will work with your Eurovan.

Why LED?

Why switch to LEDs?LEDs outperform incandescent bulbs in every key area: brighter light output, instant on/off response, vastly longer lifespan, andmost importantlydramatically lower power consumption. This lower power draw translates to a much lower amperage requirement, which is especially beneficial for older vehicles.

In classic vehicles, aging wiring, terminals, and sockets naturally develop higher resistance over time. Because LEDs require less amperage, there’s less voltage drop across the system, meaning more voltage reaches the light socket. Higher voltage at the socket improves lighting reliabilityone of the main reasons vehicles transitioned from 6V to 12V systems in the first place.

The bottom line? With LEDs, your stop, turn, reverse, and marker lights are far more likely to work exactly when you need them to.

Fitment Note

Determining whether you have an “early” or “late” van is as simple as checking the location of your emergency flasher switch.

Early Eurovans have a flasher relay on the fusebox, and an emergency flasher switch above the steering column.Inlate Eurovans, the relay was integrated into the flasher switch, and relocated to the dashboard beside the air vents.

Installation of the “late” kit requires adding the included load resistors across the turn signal bulbs using either the included wire taps, or a soldering iron.

Additional note: Many non-powered trailer wiring converters are not compatible with LED tail light bulbs. If you are experiencing both rear turn signals flashing concurrently, along with your rear running lights illuminating dimly, or other tail light oddities, the issue is likely a bad converter. The converter we sell has proven to work reliably. Alternatively, any powered style converter should be compatible.

PDF Instructions

Exterior LED Bulb Kit Instructions
LED Resistor Installation Instructions

works with:1970 Type2 Bus