4 in. Vertical Stainless Steel Venting Kit4 / each

Details

This is for vertical installation of the Ecco temp 45HI and EL22i (indoor models). You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet you will need as well determine if you will need a condensation drain. Also remember there is a maximum vent run of 20 ft. subtracting 4 ft. for every 90 elbow in the run. Please also note that any vertical venting installation with more than 5 in. run length requires a vertical condensation drain pipe as well. Includes: 1 in. x 4 in. Rain Cap 1 in. x 4 in. Top Support/Storm Collar 1 in. x 4 in. Adjustable Roof Flashing (Normal 30 Flashing) 1 in. x 4 in. Universal Appliance Adapter with Back Flow Preventer 1 in. x 4 in. Condensation Drain Pipe Z-Vent special gas vent kits are all made of AL29-4C stainless steel and are Category II/III and UL compliant.

• 1 in. x 4 in. rain cap
• 1 in. x 4 in. top support/storm collar
• 1 in. x 4 in. adjustable roof flashing (normal 30 flashing)
• 1 in. x 4 in. universal appliance adapter with backflow preventer
• 1 in. x 4 in. condensation drain pipe
• Used to drain condensate from the vent system, high temperature drain tube kit sold separately
• Vent length with test port allows easy access for flue gas analysis
• Low resistance rain cap is designed to terminate a vertical stack and prevent the entrance of debris or rain in to the vent, it also provides low resistance to flue gas flow
• Rain cap is designed to terminate a vertical stack and prevent the entrance of debris or rain into the vent, includes wind band to prevent draft loss
• For use when the vent passes through a horizontal opening, not required for non-combustible walls

Features

4